3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? cf card header compactflash ? type ii, surface mount 7e50 series physical electrical environmental compactflash is a registered trademark of sandisk corporation. insulation material: high temperature thermoplastic flammability: ul 94v-0 color: beige contact material: copper alloy plating underplating: 2.03 m [ 80 ? ] nickel wiping area: 0.38 m [ 15 ? ] or 0.76 m [ 30 ? ] gold solder tails: 3.81 m [150 ? ] matte tin or gold flash marking 3m logo current rating: 0.5 a insulation resistance: 10 3 m at 500 v dc withstanding voltage: 500 v ac for 1 minute temperature rating: -40 c to +85 c process rating: maximum 260 c (per j-std-020c) moisture sensitivity level: 1 (per j-std-020c) ts-2082-c sheet 1 of 3 ? headers mate with both compactflash ? type i and type ii cards ? polarization options for top or bottom boardmount ? extended guide rails enable accurate and easy card insertion ? single row surface mount solder tails facilitate auto placement and ir soldering ? optional 2 mm board standoff enables board population ? meets cfa standards for known compatibility and reliability ? see regulatory information appendix (ria) for chemical compliance information date modified: november 5, 2007
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? cf card header compactflash ? type ii, surface mount 7e50 series pin function l, pin length dim pin position detect 3.50 [ .138 ] 25, 26 general use 4.25 [ .167 ] all other pins power 5.00 [ .197 ] 1, 13, 38, 50 ts-2082-c sheet 2 of 3 ordering information n7e50 - x516xx - xx - wf q = cf i & ii, 18.70 mm, normal type, ejector not acceptable r = cf i & ii, 18.70 mm, inverse type, ejector not acceptable packaging options: blank = trays wf = tape and reel board standoff: 40 = none (normal type only) 50 = 2.00 mm [ .079 ] plating options: ea = 0.38 m [ 15 ? ] gold with gold flash tail eb = 0.76 m [ 30 ? ] gold with gold flash tail ra = 0.38 m [15 "] gold with matte tin tail (ria e1 & c1 apply) rb = 0.76 m [30 "] gold with matte tin tail (ria e1 & c1 apply) 3 m -a- -c- -b- pin z pin y pin w pin x r 0.01 [.004] 1.60 .063 2x 0.3175 .0125 0.3175 .0125 6.13 .241 31.12 1.225 38.74 .05 1.525 .002 0.23 .05 .009 .002 50x l 0.20 [.008] a b-c d 3.00 .118 2x 18.00 .709 2x 6.13 .241 3.00 .118 2x 18.50 .728 2x 46.00 1.811 44.70 1.760 0.635 .0250 o 2.20 .087 2x 3.30 .130 l 0.40 .02 .016 .001 50x l 0.20 [.008] a b-c d logo g h 0.60 .024 2x o 1.27 .050 1.27 .050 15.24 .600 41.70 1.642 43.00 1.693 47.00 1.850 8.70 .343 10.00 .394 26.00 1.024 0.60 .024 f e -d- mm [inch] mm tolerance unless noted [ ] dimensions for reference only .3 .000 .00 .0 .15 (ria e1 & c1 apply)
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 p c b l a y o u t card insertion compact flash card type 1 and 2 o 2.20 .05 .087 .002 2x o 1.75 .03 .069 .001 2x -a- 38.74 .05 1.525 .002 18.50 .05 .728 .002 2x 4.50 .177 2x 3.00 .118 2x 44.50 .05 1.752 .002 46.00 .05 1.811 .002 o 0.90 .03 .035 .001 2x 18.00 .10 .709 .004 2x 3.00 .05 .118 .002 2x 7.50 .295 2x -b- 0.40 .05 .016 .002 l 0.08 [.003] a-b a 0.635 .0250 31.12 1.225 pin w pin y pin x pin z 3.50 .138 50x 43.70 1.720 3m ? cf card header compactflash ? type ii, surface mount 7e50 series part number e mm [ inch ] f mm [ inch ] g mm [ inch ] h mm [ inch ] pin w pin x pin y pin z n7e50-q516xx-40 0.00 [ .000 ] 4.65 [ .183 ] 1.40 [ .055 ] 0.80 [ .031 ] pin 1 pin 25 pin 26 pin 50 n7e50-q516xx-50 2.00 [ .079 ] 6.65 [ .262 ] 1.40 [ .055 ] 0.80 [ .031 ] pin 1 pin 25 pin 26 pin 50 N7E50-R516XX-50 2.00 [ .079 ] 6.65 [ .262 ] 0.80 [ .031 ] 1.40 [ .055 ] pin 50 pin 26 pin 25 pin 1 ts-2082-c sheet 3 of 3 30 91
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/717/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below.product warranty stated below. ria-2217a-c
appendix e5: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under item 6 of the annex to the directive. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. ria-2217a-c
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2007. all rights reserved. ria-2217a-c 3 3m electronics interconnect products 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3m.com/interconnects 3m is a trademark of 3m company. appendix c3: china rohs electronic industry standard of the peoples republic of china s/t1133200 reuirements for concentration limits for certain haardous substances in electronic information products this symbol per maring for the control of pollution caused by electronic information products s/t1134200 means that the product or part does contain a substance as detailed in the chart belo in excess of the folloing maximum concentration values in any homogeneous material: a 01 by eight for lead mercury hexavalent chromium polybrominated biphenyls or polybrominated diphenyl ethers or b 001 by eight for cadmium unless otherise stated by 3m in riting this information represents 3ms best noledge and belief based upon information provided by third party suppliers to 3m the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product arranty the product arranty is stated belo in the event any product is proven not to conform ith 3ms regulatory information appendix then 3ms entire liability and buyers exclusive remedy ill be in accordance ith the product arranty stated belo
|
